Jetex Performance Exhaust System BMW 420i/428i F32/F33/F36 Cabriolet/Coupe/Gran Coupe (including xDrive) up to 6/'15 3.00"/76.50mm - 2.50"/63.50mm Half System Stainless Steel (T300 series) Twin Round 80mm Quad
Jetex Performance Exhaust System
Product Detail
Make: | BMW |
Model: | 420i/428i F32/F33/F36 |
Engine Detail: | Cabriolet/Coupe/Gran Coupe (including xDrive) |
Fitment Year: | up to 6/'15 |
Exhaust Type: | Half System |
Resonated/Non-Resonated | |
Fitting Point: | Catalyst |
Pipe Diameter | 3.00"/76.50mm - 2.50"/63.50mm |
Tailpipe(s): | Twin Round 80mm Quad |
Material: | Stainless Steel (T300 series) |
EC Approval | No |
Notes | Spoiler must be trimmed or replaced for tailpipes. |
About Jetex
With 30 years of exhaust design and development experience, Jetex have gained a reputation of producing exhausts that are well engineered, perform consistently and create a perfect harmony between car and exhaust.
Absorption Designed
Sound reduction is a critical design concern with any exhaust system. Standard exhausts use a baffle design where a series of plates slow the exhaust gases, but ultimately this leads to an increase in back pressure. Jetex silencers have no baffles. Instead, noise is reduced by absorption through a centre perforated tube. Consequently, there is less gas flow restriction and so back pressure is reduced, torque is increased and engine performance is enhanced.
Mandrel Bends
It is essential that gas flow from the engine is unrestricted and flows smoothly along the whole length of the exhaust system. All Jetex bends (where possible) are mandrel bent rather than cut and welded. This ensures that the gas exits as quickly as possible, ensuring back pressure reduction and enhanced engine performance.
Tailpipes
All tailpipes are made from polished T304 stainless steel and are designed to complement the styling of each model. Most tailpipes are rolled inwards to create a clean and stylish look
Fitting Kit
A fitting kit is provided with every Jetex system. With each exhaust, you can expect a minimum of a set of clamps to allow the exhaust to be fitted to the car. However, in many cases and where appropriate, stepped adaptors for the OE pipework, rubber mountings and in some cases, extra hangers are also provided.