Jetex Performance Exhaust System Audi A5 Diesel Turbo 2WD/Quattro (06+) 2.0TDI 06+ 2.75"/70.00mm - 2.25"/57.00mm Half System Stainless Steel (T300 series) Twin Round 80mm Quad

Jetex

£810.95 
SKU: JPES-93

Jetex Performance Exhaust System

Product Detail
Make: Audi
Model: A5 Diesel Turbo 2WD/Quattro (06+)
Engine Detail: 2.0TDI
Fitment Year: 06+
Exhaust Type: Half System
Resonated/Non-Resonated
Fitting Point: After Original D/Pipe
Pipe Diameter 2.75"/70.00mm - 2.25"/57.00mm
Tailpipe(s): Twin Round 80mm Quad
Material: Stainless Steel (T300 series)
EC Approval Yes
Notes Spoiler must be trimmed or replaced. The original diffuser from S5 models can be used with S-Line package.

About Jetex

With 30 years of exhaust design and development experience, Jetex have gained a reputation of producing exhausts that are well engineered, perform consistently and create a perfect harmony between car and exhaust.

Absorption Designed

Sound reduction is a critical design concern with any exhaust system. Standard exhausts use a baffle design where a series of plates slow the exhaust gases, but ultimately this leads to an increase in back pressure. Jetex silencers have no baffles. Instead, noise is reduced by absorption through a centre perforated tube. Consequently, there is less gas flow restriction and so back pressure is reduced, torque is increased and engine performance is enhanced.

Mandrel Bends

It is essential that gas flow from the engine is unrestricted and flows smoothly along the whole length of the exhaust system. All Jetex bends (where possible) are mandrel bent rather than cut and welded. This ensures that the gas exits as quickly as possible, ensuring back pressure reduction and enhanced engine performance.

Tailpipes

All tailpipes are made from polished T304 stainless steel and are designed to complement the styling of each model. Most tailpipes are rolled inwards to create a clean and stylish look

Fitting Kit

A fitting kit is provided with every Jetex system. With each exhaust, you can expect a minimum of a set of clamps to allow the exhaust to be fitted to the car. However, in many cases and where appropriate, stepped adaptors for the OE pipework, rubber mountings and in some cases, extra hangers are also provided.

Our brands